Feet Cover Tarp
 |
 NEW 8 X 12 FEET COVER TARP CANOPY HEAVY DUTY  US $3.67
|
 NEW Blue Heavy Duty 12 X 16 Feet Cover TARP Canopy Tent US $6.08
|
 NEW Blue Heavy Duty 6 X 8 Feet Cover TARP Canopy Tent US $1.51
|
 New 4m x 5m or 13 feet x 16 feet Green Waterproof Tarp Tarpaulin Sheet Cover US $14.21
|
 NEW 24 X 36 FEET COVER TARP CANOPY HEAVY DUTY TENT US $27.25
|
 New Heavy Duty 10 x 20 Feet Boat Tent Cover Tarp Canopy US $9.49
|
 NEW 20 X 40 FEET COVER TARP CANOPY HEAVY DUTY TENT US $36.49
|
 New 10 X 24 Feet Cover Tarp Canopy Heavy Duty Tent US $19.40
|
 NEW 20 X 30 FEET COVER TARP CANOPY HEAVY DUTY TENT US $22.50
|
 NEW 12 X 18 FEET COVER TARP CANOPY HEAVY DUTY TENT US $8.10
|
 NEW 24 X 24 FEET COVER TARP CANOPY HEAVY DUTY TENT US $21.60
|
 New Heavy Duty 10 x 30 Feet Boat Tent Cover Tarp Canopy US $11.25
|
 NEW COVER TARP BLUE 16 x 20 feet ALL PURPOSE US $9.99
|
 Poly Tarp 8x10 80 Sq Feet BLUE Heavy Duty Cover Shield US $5.50
|
 18m x 12m 6 feet x 4 feet Camouflage Waterproof Tarp Tarpaulin Sheet Cover US $3.94
|
 Gray 9 X 12 Feet Cover Tarp Canopy Water Mildew Proof US $3.46
|
 NEW 8 X 10 FEET COVER TARP CANOPY HEAVY DUTY US $2.52
|
 NEW 16 X 20 FEET COVER TARP CANOPY HEAVY DUTY TENT US $10.23
|
 NEW 10 X 10 FEET COVER TARP CANOPY HEAVY DUTY TENT US $3.42
|
 18m x 24m or 6 feet x 8 feet Green Waterproof Tarp Tarpaulin Sheet Cover US $4.73
|
 NEW COVER TARP SILVER 10 x 16 feet ALL PURPOSE US $22.99
|
 NEW COVER TARP SILVER 10 x 12 feet ALL PURPOSE US $14.99
|
 NEW COVER TARP SILVER 20 x 30 feet ALL PURPOSE US $57.99
|
 NEW BLUE 9 X 12 FEET COVER TARP US $7.49
|
 NEW BLUE 10 X 12 FEET COVER TARP US $7.89
|
 NEW COVER TARP SILVER 20 x 20 feet ALL PURPOSE US $44.99
|
 Master Tradesman 15 x 30 Feet Hunter Green Brown Polyethylene Storage Tarp Cover US $43.99
|
 NEW COVER TARP SILVER 9 x 12 feet ALL PURPOSE US $.99
|
 NEW COVER TARP BLUE 10 x 12 feet ALL PURPOSE US $.99
|
 NEW COVER TARP BLUE 10 x 20 feet ALL PURPOSE US $.99
|
 NEW 20 X 20 FEET COVER TARP CANOPY HEAVY DUTY TENT US $12.62
|
 NEW 12 X 14 FEET COVER TARP CANOPY HEAVY DUTY TENT US $5.82
|
 NEW 7 X 9 FEET COVER TARP CANOPY HEAVY DUTY TENT US $1.94
|
 NEW Blue Heavy Duty 10 X 16 Feet Cover TARP Canopy Tent US $5.05
|
 NEW Blue Heavy Duty 10 X 18 Feet Cover TARP Canopy Tent US $6.38
|
Operating A Seamless Gutter Machine
Anyone who is going to operate a gutter machine must first read and understand the manual provided by the machine manufacturer. The first reason is the safety of the operator—the manual will guide you on safe practices that will help you avoid personal injury. The second reason is to properly operate the machine so it will produce hi-quality gutter and avoid damage to the machine. A seamless gutter machine typically produces about 30 feet of gutter per minute. It usually only needs to be operated a few minutes per day to produce the gutter required for that day’s work. In most cases the gutter machine will have been transported to the worksite with a coil of material on the machine and then run through the machine. Remove the cover tarp from the machine, if present. Verify that the coil of material in the machine is correct for the job to be run.
Obtain an electric extension cord of the necessary length and appropriate size (based on the line cord length and load) to reach electric power. Verify that the power circuit has adequate capacity. Connect the power cord through a ground fault detector, if possible. If connecting directly to a generator, verify that the generator capacity is sufficient to run the gutter machine. The operator should not wear any loose-fitting clothing, jewelry, etc., which could be caught in moving parts of the machine. Safety goggles and gloves are highly recommended. Because of the danger of electric shock, and the possibility of damage to the machine, it is recommended that the gutter machine never be operated when rain or snow can fall onto the machine unless the machine is mounted inside an enclosed trailer or truck.
Before starting operation, the operator should:
•Visually check the electrical components and wiring to assure there are no signs of any heat discoloration or damage.
•Be sure all safety covers on the gutter machine are closed and secured in place to prevent dirt, dust, and foreign objects from entering the machine.
•Remove the spool retaining pin from the spool of coil that is threaded through the machine.
•Verify that the Forward/Reverse switch is in the Forward position.
•Position run out stands at 8- to 10-foot intervals to support the gutter that will come out of the machine.
•Lubricate the blade of the shear with the lubricant recommended in the operation manual. DO NOT use WD-40 on the shear blade or the machine unless specifically recommended by the operation manual.
Start the machine and run out enough gutter to clear all material that was in the machine path during transport. Cut off and discard. This step is only necessary for machines that have a steel rolled drive system (Knudson, Panther, Watertite). Free floating polyurethane drive roll systems do not require coil in the machine for transport (Ironman, New Tech).
Run about seven to ten feet of gutter through the machine as a check sample. Stop the machine and cut off the piece. Inspect the gutter carefully for:
•Proper shape.
•Paint damage (peeling, flaking, scratches, etc.).
•Surface imperfections from the rollers.
•Any other irregularities.
If any problems are detected, diagnose the cause and make corrections before proceeding. If adjustments are required, shut off the machine and disconnect the power line. Incorrect alignment of material in the machine is the most common cause of problems with a gutter machine. This can result from:
•Incorrect adjustment of the entrance guides
•Incorrect adjustment of the stations
Be sure that necessary adjustments are performed by someone who has been properly trained in how to adjust the machine. When it is verified that the gutter sample meets the job requirements, proceed with the production of the necessary pieces of gutter. The operator should learn what the machine sounds like when running properly and make a practice of listening to the machine when running gutter. If the machine begins making unusual sounds it probably means something is wrong and needs to be cleaned, lubricated, adjusted, or repaired.
Changing Spools
If it is necessary to change the material to be run (for instance, because of paint color requirements):
•Make sure the loading area is clean and free of debris.
•Cut the existing material between the spool and the entrance guide system.
•Install the spool retaining pin.
•Run the end piece of material out of the machine. Discard this piece.
•If the alternate material coil is already on another spool on the spool rack, remove its spool retaining ring and proceed with threading, as below, according to the operation manual.
•If the coil must be removed and a new coil loaded on to the machine, follow the instructions of the operating manual.
A COIL OF MATERIAL IS EXTREMELY HEAVY. USE APPROPRIATE LIFTING EQUIPMENT AND ASSISTANCE, AS REQUIRED.
•Pull the end of the coil off the spool. Cut both of the leading corners of the material at 45° angles, approximately 3 inches in from the corner. Insert the trimmed edges of the material into the entrance guides and push forward to the first drive rollers. Jog the material through the machine. Stop at each station to verify that the material is feeding properly and running smoothly through the rollers. If any problems occur, reverse the material a short distance, determine the problem, and clear the obstruction.
•Jog the material until the end has passed the shear.
•If any problems developed, after they have been corrected, run the distorted material out of the machine, cut it off, and discard.
•Close and secure all safety and access covers before proceeding to produce gutter.
When the required gutter has been produced, turn off the machine, disconnect it from the electric power circuit, and reinstall the spool retaining pin. If this is the last run before transporting the machine to a new site, confirm that material is threaded through the entire machine to protect the rollers from roller-to-roller impact damage. (This does not apply for New Tech Machinery and KWM Ironman units which can be safely transported without coil material between the rollers.) Cover the machine with a tarp or gutter machine cover to protect it from external debris and weather. DO NOT DUMP OLD GUTTER OR DOWNSPOUTS FROM A CUSTOMER’S LOCATION INSIDE THE TRUCK OR TRAILER WITH THE GUTTER MACHINE. DIRT, LEAVES, AND OTHER DEBRIS MAY GET ON OR IN THE GUTTER MACHINE AND CAUSE DAMAGE.
Sock Woodruff is founder and partner of GutterSupply.com, the leading manufacturer and distributor of gutter supplies, gutter machine, and related tools and equipment.
About the Author
Paul Collins is great and successful businessperson varied into many things throughout his whole career. As business development and supplier, he provides gutter related materials and machines such as gutter machine, gutter tools, gutter accessories and gutter wedges.
|
|
8' X 10' Blue Multi-Purpose 6-mil Waterproof Poly Tarp Cover 8x10 Tent Shelter Camping Tarpaulin by Grizzly Tarps $8.95 The superior grade tarps by Grizzly Tarps are made from a tight 8x8 sq inch polyethylene weave which provides durability. This method of manufacture gives you a long lasting cover that is lightweight and easy to handle. Grizzly Tarps further enforce their tarps with border piping to insure stronger ends to avoid tears during stressful application. Supplied with built-in grommets every 34" allow fo... |
|
|
Dry Top 210125 10-by-12-Foot Super Heavy-Duty 10-Mil UV Treated Tarp, Silver/Brown Reversible $10.00 Silver color, super heavy duty 10 Mil. plastic and specially treated to reflect sunlight. Labeled heavy duty polyethylene tarps are laminated on both sides for maximum weather proofing, cross weave fabric is designed for maximum strength and durability. High strength rust resistant grommets on each corner and approximately every 18 inches, lightweight, tear resistant, washable, mildew proof and wa... |
|
|
Dewitt P3 3-by-250-Foot 5-Ounce Pro 5 Weed Barrier Fabric $96.20 Dewitt P3 3' x 250' Pro-5 Weed-Barrier Landscape Fabric, BlackPro-5 Weed Barrier is the industry's best 5-Ounce woven, needle-punched, polypropylene fabrics designed for professional and commercial use. Pro-5 Weed Barrier has been approved by leading landscape architects and most government agencies. Pro-5 Weed Barrier conserves soil moisture, increases growth and prevents unwanted weeds from germ... |
|
|
RATCHET TIE DOWN 4PC W/HANDL, Color: GREY; Size: 15 FOOT/4 PACK (Catalog Category: Home:TARPS AND COVERS) $43.75 Easy grip padded handle. More tension to secure load. Compact, nonmarring s-hooks. Heavy duty, 500 pound load limit, 15 foot. 4 pack.(Color: GREY; Size: 15 FOOT/4 PACK)... |
|
|
Allsop Cleanup Canvas 27602 $15.99 The Allsop clean-up canvas collects, contains, and moves yard waste without straining your back, or messing up the interior of your car. Capable of containing 20 cubic feet of material, and constructed from double-strength material, the clean-up canvas conveniently loads from the ground level. After piling on grass, leaves, bark, and other landscape material, the easy wrapping design secures the l... |
|
|
Intex Easy Set 8-Foot Pool Cover $6.52 Protect your pool with this Intex(tm) Easy Set 8' pool cover. It is designed with a 12" overhang and drain holes to prevent water accumulation.... |
|
|
Intex Pool Ground Cloth $17.80 Protect your Pool Bottom! The Pool Ground Cloth is made of durable material to offer you pool bottom added protection and longevity.... |
|
|
Intex Deluxe 18-Foot Round Pool Cover $33.50 UV-resistant polyethylene material Rope ties Drain holes to prevent water accumulation Fits 18 ft diameter pools (549cm) 8 inch overhang (20cm)... |
|
|
Keeper 07203 Waterproof Roof Top Cargo Bag (15 Cubic Feet) $44.19 Waterproof, increases vehicle cargo space, protects cargo against rain, grit, sun and wind. Soft sides flex to fit odd shaped loads, folds compact for storage. Fits all roof racks. 15 cubic feet.... |
|
|
Coleman Instant 14- by 10- Foot 8- Person Two Room Tent $199.99 The Coleman Instant 8 person 14- by 10- Foot tent is perfect for the family that is looking to get their campsite set up quickly to start enjoying the outdoors. This is an 8 person, two room tent that has straight walls that make standing up in this tent easy with plenty of head room at 6'5" center height. Fully taped seems with 150D fabric allows Coleman to provide the keeps you dry guaranteed wi... |
